Halloween pumpkin15% off Gorilla Grippers through Halloween — use code HALLOWEEN10 at checkout
Reversible serrated and smooth 1-inch workholding grippers on a grid mat
Gloved hand holding vise soft jaws with serrated workholding gripper teeth, USA flag background
Close-up of serrated workholding gripper teeth mounted in vise jaws
Steel vise jaw with a row of serrated workholding gripper teeth installed, on a grid mat
Serrated workholding gripper teeth mounted in a CNC vise jaw
Close-up of serrated workholding gripper blocks mounted along a steel soft jaw
  • Load image into Gallery viewer, Reversible serrated and smooth 1-inch workholding grippers on a grid mat
  • Load image into Gallery viewer, Gloved hand holding vise soft jaws with serrated workholding gripper teeth, USA flag background
  • Load image into Gallery viewer, Close-up of serrated workholding gripper teeth mounted in vise jaws
  • Load image into Gallery viewer, Steel vise jaw with a row of serrated workholding gripper teeth installed, on a grid mat
  • Load image into Gallery viewer, Serrated workholding gripper teeth mounted in a CNC vise jaw
  • Load image into Gallery viewer, Close-up of serrated workholding gripper blocks mounted along a steel soft jaw

1" Gorilla Grippers (Pack of 10) – Smooth/Serrated Reversible

$213.19
$213.19
Sold out

TYPE: REVERSIBLE — serrated one side, smooth the other. Two grippers in one.

PACKAGE INCLUDES: 10 x 1" reversible gripper teeth — serrated on one side, smooth on the other. .125" step height.

DESCRIPTION: Two grippers in one. Run the serrated side for maximum bite on rough stock; flip to the smooth side when the part can't take a mark. Clamps .125" or thinner material without slipping. Made and assembled in the USA from certified A2 tool steel, heat-treated to HRC 46-48. Works with quick-change fixtures.

SPECIFICATIONS: Length 1" | Step height .125" | Hardness HRC 46-48 | Material: certified A2 tool steel | Qty: 10 per pack

CAD MODEL

Designing your own jaws or fixture? Download the 3D CAD model of the 1" smooth/serrated Gorilla Gripper and drop it straight into your CAD assembly.

1 inch smooth/serrated Gorilla Gripper dimension drawing - top, front and side views. A length 1.000 in, B width .520 in, C height .525 in, D step .125 in, E base width .400 in

Version Serrated Smooth/
Serrated		 Smooth/
Smooth
Model Serrated Gorilla Gripper - top view Smooth/Serrated Gorilla Gripper - top view Smooth/Smooth Gorilla Gripper - top view
Description 1" Gorilla Gripper — Serrated 1" Gorilla Grippers — Smooth/Serrated 1" Gorilla Grippers — Smooth/Smooth
CAD ⬇ STEP ⬇ STEP ⬇ STEP
A — Length 1.000" (25.4 mm) 1.000" (25.4 mm) 1.000" (25.4 mm)
B — Width .520" (13.2 mm) .520" (13.2 mm) .520" (13.2 mm)
C — Height .525" (13.3 mm) .525" (13.3 mm) .525" (13.3 mm)
D — Step Height .125" (3.2 mm) .125" (3.2 mm) .125" (3.2 mm)
E — Base Width .400" (10.2 mm) .400" (10.2 mm) .400" (10.2 mm)
Material A2 tool steel A2 tool steel A2 tool steel
Hardness HRC 46–48 HRC 46–48 HRC 46–48
Per Pack 1 or 10 10 10
Price $15 / $150 $150 $150

STEP format — opens in SolidWorks, Fusion 360, Mastercam, BobCAD-CAM and most other CAD/CAM software.

What machinists are saying

"I use them. It is a very good platform because one set of jaws can be used as regular flat jaws w/ parallels, or with flat grippers, serrated round grippers or smooth round grippers. I'd highly recommend them. Not only that but they are way more robust than Talon Grips."
— Practical Machinist Forum Member

"They are nice. We ran 2 sets grabbing .125" of the material using a .375 endmill at 12000rpm 1.07" deep at 300ipm and they held. Ran 260 parts and endmill was still sharp too."
— Practical Machinist Forum Member

"There is a lot I like about them vs the talongrip. Nice big screws, nice deep seat for them and round grippers available for the same jaws. And they are quite a bit cheaper."
— Practical Machinist Forum Member

FROM THE GUIDES

%} }} }}] %} %} }} %} }}' }} }} }}'> %} %} %} %}