Halloween pumpkinGorilla Grippers 万圣节优惠 15% — 结账时使用优惠码 HALLOWEEN10
Reversible serrated and smooth 1-inch workholding grippers on a grid mat
Gloved hand holding vise soft jaws with serrated workholding gripper teeth, USA flag background
Close-up of serrated workholding gripper teeth mounted in vise jaws
Steel vise jaw with a row of serrated workholding gripper teeth installed, on a grid mat
Serrated workholding gripper teeth mounted in a CNC vise jaw
Close-up of serrated workholding gripper blocks mounted along a steel soft jaw
  • 将图片加载到图库查看器，Reversible serrated and smooth 1-inch workholding grippers on a grid mat
  • 将图片加载到图库查看器，Gloved hand holding vise soft jaws with serrated workholding gripper teeth, USA flag background
  • 将图片加载到图库查看器，Close-up of serrated workholding gripper teeth mounted in vise jaws
  • 将图片加载到图库查看器，Steel vise jaw with a row of serrated workholding gripper teeth installed, on a grid mat
  • 将图片加载到图库查看器，Serrated workholding gripper teeth mounted in a CNC vise jaw
  • 将图片加载到图库查看器，Close-up of serrated workholding gripper blocks mounted along a steel soft jaw

1" Gorilla Grippers(10 个装)– 锯齿/光面双面可用

$150.00
$150.00
售罄

类型:双面可用 — 一面锯齿,一面光面。一个夹齿,两种用途。

包装内容:10 个 1" 双面夹齿 — 一面锯齿,一面光面。台阶高度 .125"。

产品说明:一个夹齿,两种用途。锯齿面用于粗加工毛坯,咬合力最强;当零件不能留痕时,翻到光面即可。可夹持 .125" 或更薄的材料而不打滑。采用经认证的 A2 工具钢,在美国制造和组装,热处理至 HRC 46-48。适用于快换夹具。

规格参数:长度 1" | 台阶高度 .125" | 硬度 HRC 46-48 | 材料:经认证的 A2 工具钢 | 数量:每包 10 个

机加工师傅们的评价

"我一直在用。这是一个非常好的平台,因为一套钳口既可以配平行垫块当普通平钳口使用,也可以配平面夹齿、锯齿圆夹齿或光面圆夹齿。我非常推荐。而且它们比 Talon Grips 结实得多。"
— Practical Machinist 论坛会员

"确实不错。我们用 2 套夹持 .125" 的材料,用 .375 立铣刀在 12000rpm、1.07" 切深、300ipm 进给下加工,夹得很稳。跑了 260 个零件,立铣刀还很锋利。"
— Practical Machinist 论坛会员

"和 TalonGrip 相比,我喜欢的地方很多。螺钉大,座深也大,同一套钳口还能配圆夹齿。而且价格便宜不少。"
— Practical Machinist 论坛会员

%} }} }}] %} %} }} %} }}' }} }} }}'> %} %} %} %}